Anchor VENUE SERIES - PROFILE SIZE: 160MM X 100MM - Manual (Page 27)

Step 7: Specifications
Clearspan Widths (meters): 9.0 / 10.0 / 12.0 / 15.0 / 18.0
Ridge Heights (meters): 4.9 / 5.1 / 5.4 / 5.9 / 6.45
Side Heights (meters): 3.0 / 4.0 with 1 meter extension
Minimum Length: Minimum bays provided in a given structure should ensure that the
structure length is greater than the structure width
Maximum Length: No Limit
Roof Pitch: 20 degrees
Bay Distance (meters): 5.0
Minimum number of Bays: 9M – 2 / 10M – 3 / 12M – 3 / 15M – 4 / 18M – 5
Extrusion Profiles (millimeters):
- Uprights & Rafters
160 x 100
- Gable End Uprights 130 x 70
- Ridge, Eave & G.E. Purlins 130 x 70
- Intermediate Roof Purlins 80 x 80
Rafter Extension Options: 12-9 / 15-9 / 15-12 / 18-9 / 18-12 / 18-15 (NOTE: 18-9 structure is
NOT certified)
Longest Components (meters): 9.8 (18.0 One-piece Rafter)
Main Frame Material: Aluminum 6061 – T6
Main Frame Finish: Anodized 204 R1
Connection Material: Steel, zinc plated or galvanized
Connection Type:
- Ridge
Internal Steel Weldment
- Eave External Aluminum Gusset Plates
- Splice Internal Aluminum Insert
Engineering Certification: In compliance with ASCE 7 – 05 for 90 mph, 3 second wind gust
(NOTE: 18-9M structure is not certified)
27