Led rope light, bulk reel – American Lighting ULRL-LED-XX-150 User Manual
Page 2
WARNING:
Risk of fire. Do not replace attachment plug! Plug contains a safety feature (fuses) that
should not be removed. Discard cord set if the attachment plug is damaged.
NOTE: Do not exceed 150 foot maximum run distance in any single run!
INSTALLING ROPE LIGHT
1. Attach mounting clips with nails or screws onto wooden surfaces.
Be sure that surface is mechanically sound. See Figure 4.
2. For best results, mounting clips should be evenly spaced and be
a maximum of 12 inches apart. See Figure 5.
3. Make sure that the distance between two lines of Rope Light
are at least 1/2" apart. NOTE: For straight line applications, use
DL-TRACK-4 mounting track (sold separately).
4. Gently press rope light into track or clips so that it snaps into place.
PROP 65 WARINING
Handling the coated electrical wires of this product exposes you to lead, a
chemical known to the State of California to cause cancer, birth defects and
other reproductive harm.
WASH HANDS AFTER USE.
Figure 4
www.americanlighting.com
RV1309
Installation instructions for ULRL-LED-XX-150
LED Rope Light, Bulk Reel
Listing becomes void if altered in any way
Figure 5
12” maximum