American Lighting AL-2H-XX Series - Manual (Page 2)

©2013 American Lighting
Denver, CO 80231 Made in China
READ ALL OF THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THESE ACCESSORIES. FAILURE TO
FOLLOW INSTALLATION INSTRUCTIONS AND ALL APPLICABLE ELECTRICAL CODES WILL VOID THE PRODUCT
WARRANTY.
WARNING:
These products may represent a possible shock or fire hazard if improperly installed or attached in any way.
Products should be installed in accordance with these instructions, current electrical codes and/or the current
National Electric Code (NEC).
WARNING:
Disconnect supply power from the source prior to installation. This product and its accessories must be installed
by a person familiar with the construction and operation of the product and the hazards involved, and in accor-
dance with current electrical codes and/or the current National Electric Code (NEC). Consult a local licensed
electrician if you are not sure about the installation. To reduce potential of electric shock, fixture must be
grounded.
APPLICATION / USE:
This accessory extension arm is designed for use with American Lighting’s Panorama Flood Lights in surface mount
applications only. See fixture instructions in addition to these instructions
INSTALLATION:
Disconnect supply power from the source prior to installation.
1. For AL-1H and AL-2H versions, start by loosening the locknut on the canopy to
remove it. With canopy off, feed the black, white and copper wires through the
1/2“ opening of the extension arm, thread the fixture’s mounting arm into the
extension and secure it with the 1/2” locknut.
2. Continue installation by following fixture’s instruction sheet.
www.americanlighting.com
LED PANORAMA EXTENSION ARMS
Installation instructions for AL-4C-DB and AL-4C-WH
RV-1302