Allen&Heath DP 1000 USER GUIDE - Manual (Page 62)

2 AP3876 – Addendum to User Guide – Software Update V2.01 icon
SERIES
D
ESCRIPTION
Features have been added to make the
icon even easier to use and more versatile in its
application. Many minor updates improve operating speed, information display and ease of
use. Existing users should have no difficulty adapting to the new software as the operating
principles remain unchanged. They shall, however, benefit from the new features added which
further extend the sound processing and automation control. These are described below. If
further information is required on these or any other features of the product please contact your
Allen & Heath agent or email technical support direct at [email protected]
S
ONG AND
V
ENUE
M
EMORIES
STORE TO Press ENTER to store the current mixer
settings to the displayed memory number. Use the
τυ
keys or soft strip control 10 (song) or 9 (venue) to
select a different memory number if required. Note
that this number becomes current after pressing
ENTER. Unlike the previous version the display does
not return to the
HOME screen after store is complete.
This is better for continued editing of the memory
name or lock function.
RECALL Previously only available in the HOME
screen, the memories can now be recalled within the
SONG or VENUE screens. Use the
τυ
keys or soft strip
control 10 (song) or 9 (venue) to select a different
memory number if required. To recall the same
number press
υ
once first.
COPY Press COPY while in the STORE or
RECALL screen. This copies the current song or
venue settings to the copy buffer. The
PASTE key
lights to show that valid data is available in the
buffer.
PASTE The PASTE key lights only if valid copy
data is available. The key flashes if the copy data is
different to the current mixer settings. The key lights
but does not flash if the data is the same as current. If
copy data is not available the key does not light.
Press
PASTE to overwrite the mixer settings with the
contents of the copy buffer. It is not possible to paste
data direct to the memories. This should be done by
first pasting data to the mixer then using the store
function.
RESET Press RESET while in the STORE or
RECALL screen. This resets all associated
parameters to their default settings so providing a
useful starting point for a new mix.
UNDO Press UNDO to reverse the last action carried
out. Confirm screens and the undo function prevent
the memories or mixer settings from being
inadvertently overwritten and lost. Note that undo is
only available immediately after the unwanted action
has been carried out. The
UNDO key lights when this
function is available.
S
ET
P
ROGRAMMING
RECALL Previously only available in the HOME
screen, sets can now be recalled in the
SET screen.
Use the
τυ
keys or soft control 8 to select the required
set number 1 to 9, auto or no set. Note that this
number becomes current after pressing
ENTER.
NO SET The display ‘ SET OFF’ has been changed
to ‘
NO SET’ to avoid confusion. The factory default
is no set active. Use the new recall function in the
SET screen to select a set for programming or play.
PROGRAM AUTO INCREMENT Programming a
set has been made easier with less button pressing
required. Each time a song memory is entered at the
end of the set the cursor automatically advances to
the next position and the song number increments by
one. A set of incremental songs can be quickly
programmed simply by repeating
ENTER. The usual
song selection and editing functions are still
available.
SET PLAY Further information is provided in the
HOME screen to display when the set has been
interrupted by recalling a song not part of the active
set, for example, playing an audience request. The
SETNAME is struck out ( SET 2 ) until PAUSE or
NEXT is pressed to continue the set sequence.
U
NDO
This facility has been extended to more functions
including memory store and recall, set programming
and the new safes map feature. The
UNDO key lights
when available. Confirm screens display briefly the
action being undone. Note that
UNDO is also
available in the
HOME screen to undo a memory recall
using the
NEXT key, footswitch or cursor keys.