Allen&Heath DP 1000 USER GUIDE - Manual (Page 4)

I
MPORTANT
M
AINS
P
LUG
W
IRING
I
NSTRUCTIONS
The icon is supplied with a moulded mains plug fitted to the power lead. If the
mains plug has to be replaced, follow the instructions below.
WARNING: This apparatus must be earthed
The wires in the mains lead are coloured in accordance with the following code:
WIRE COLOUR TERMINAL
European USA & Canada
L LIVE BROWN BLACK
N NEUTRAL BLUE WHITE
E EARTH GND GREEN & YELLOW GREEN
As the colours of the wires in the mains lead may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal
in the plug which is marked with the letter E or by the safety earth symbol.
The wire which is coloured Blue must be connected to the terminal in the plug
which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the plug
which is marked with the letter L.
S
AVING
U
SER
D
ATA
It is recommended that you save all memory data to an external device such as a
MIDI data filer or the Allen & Heath
icon Archiver running on a PC to prevent
loss of important data due to a malfunction or user operating error.
Allen & Heath cannot be held responsible for user data that is lost or destroyed.
IMPORTANT NOTE : The user settings and memories are lost when new
operating software is loaded. We recommend that you save these first using a
MIDI or PC archiver so that they can be loaded back into the mixer after the
update. A Windows
® compatible archiving utility may be downloaded from the
Allen & Heath web site.
iv
icon
SERIES