Allen&Heath DP 1000 USER GUIDE - Manual (Page 21)

S
CREEN
S
ELECT
K
EYS
HOME This is the normal screen for live performance. The memories are
RECALLED from this screen. The memory names and set progress
bar are displayed. The icon powers up in this screen.
UTIL Select this screen to access a menu of utility functions including
LCD contrast setting, user name edit, MIDI channel select, data
archiving routines, SAFE map for parameter isolation, user
operating mode, and display of software version number.
8
4 BAND PARAMETRIC EQ
EQ 1 2 EQ 3 EQ EQ 4 EQ 5 EQ 6 EQ 7 EQ
BALANCE
B
EFFECTS REVERB
1 FX FX 2
FOLDBACK SENDS TRIM
NOISE GATES
GATE
FB AUX
10 BAND GRAPHIC EQ
LEVEL
EQ
PAN
A EQ
HOME
COMPRESSORS
AMPLIFIER SETUP
MODE
COMP
SONGS
MEMORY
STORE
SONG
VENUE
UTILITY
SEQUENCE
UTIL
SET OF
RECALL
PERFORMANCE
These round keys decide the function of the soft strip and display above.
Pressing a key instantly selects the function printed on the keycap. Repeated
pressing of the key toggles through the menu items associated with the
selected function. Where only one menu item is available, pressing the key
twice returns to the
HOME screen.
SET Select this screen to recall, name and program the song sequence
memories.
VENUE Select this screen to RECALL or STORE the current A,B output
equaliser and mode settings in the venue memories. You can also
name and lock the memories.
SONG Select this screen to RECALL or STORE the current channel
settings in the song memories. You can also name and lock the
memories.
EQ1-8 Press these keys to toggle between the channel equaliser, gate and
compressor screens. The soft controls and display change
according to function.
FX1,2 Select these screens to adjust the amount of effect for each channel,
select the effects type, and adjust the parameters. Level bars and
values are displayed. The footswitch function can be changed.
AUX Select this screen to adjust the level of each channel in the aux mix.
You can also select whether the sends are globally pre or post fader.
FB Select this screen to adjust the level of each channel in the pre-fade
foldback mix.
LEVEL Select this screen to adjust the channel level trims. These provide a
degree of level automation when used with the song memories. The
level trim function can be turned off if required.
PAN Select this screen to adjust the position of mono signals and balance
of stereo signals in the LR mix.
COMP Select this screen for a global view of the compressor parameters
for all channels.
GATE Select this screen for a global view of the gate parameters for all
channels.
EQA,B Select these screens to adjust the graphic equalisers for outputs A
and B. The controls become the gain controls for each of the 10
frequency bands and in/out switch. Fader bars are displayed.
MODE Select this screen to change the output configuration. You can
select which of the L, R, L+R (mono), Aux and FB mixes are routed
to the A and B main outputs or amplifiers.
icon
SERIES
3 - 5