AirLive WP-203G - Manual (Page 94)

8.4.4 SMB
You can enable/disable the SMB protocol from here. If SMB is enabled,
enter the “SMB Group Name” to specify the SMB group that this print
server belongs to. All PC should join the same group before they can use
this print server by SMB protocol.
Pass Job when Error Occurred: When the printer is interrupted because
of paper out or off line while printing, user can enable this function and
set the interval time to bypass the current printing job. Or the printing
document will not be printed completely or with unformatted messages.
Waiting Time to Pass Job: The range is from 1 to 60 seconds. By default,
the parameter is enabled and the default waiting time is 20 seconds.
89