AirLive WP-203G User Manual

Page 88

case, the print server will run in Ethernet mode. If the print server is not

connected to an active network by Ethernet cable, the print server will run

in wireless LAN mode.

Users can plug the Ethernet cable to the print server at the first, after

configuring the print server features and wireless settings; they can unplug

the Ethernet cable to enable the wireless connection. It makes the

configuration much easier without creating the wireless connection in

advance.

Enable – Enable wireless function only, the print server’s wireless LAN

will be always enabled and Ethernet will be always disabled.

Disable – Disable the wireless function, the print server’s wireless LAN

will be always disabled and Ethernet will be always enabled.

Mode is the operation mode of wireless station. You can choose ether “Ad

Hoc” or “Infrastructure” mode. If you do not have any access point and

want to use peer-to-peer connection, you have to choose “Ad Hoc” mode.

If you have an access point as the wireless LAN infrastructure, you have

to choose “Infrastructure” mode.

ESSID is the unique name identified by in a wireless LAN. The ID

prevents the unintentional merging of two co-located WLANs. Please

make sure that the ESSID of all stations and access points in the same

WLAN network are the same.

Channel Number is the channel number of your wireless LAN. Please

make sure that the channel number of all stations and access points in the

same WLAN network are the same.