AirLive WP-203G - Manual (Page 60)

7.12 System Configuration
Double Click “System” icon and the System configuration window will
pop-up.
In the System configuration page, you can select to enable/disable each
printing or management protocol, assign name for each printer port of this
print server, and upgrade the new firmware for this print server.
Port Name is the name of the printer port. The Print Server has three
printer ports, two USB 2.0 ports and one parallel port. Each printer port
has to be assigned a name. Then you can use this name to access the
printer port. By default, the printer port name is “p1” for port 1, “p2” for
port 2 and “p3” for port 3.
Upgrade: You can use this “Upgrade” tool to update the newest firmware
of the print server. Click “ ” button and select the correct firmware in
your PC. After selecting the firmware file, click the “Upgrade” button to
finish the firmware update process.
55