AirLive WP-203G - Manual (Page 63)

Infrastructure Mode:
In the Infrastructure mode, you have to let the print server associate with
an access point. You let the print server scan for an available access point
automatically or manually assign the SSID of the access point you want to
use.
If you select to let the print server scan for an available access point, the
following window will pop up.
The list is the scanned available access points. Sel ect an access point in
the list and click “Next”. If you cannot find the access point that you want
to use, click “Scan” to let the print server scan again.
58