AirLive WP-203G User Manual

Page 46

:lp=:\

:rm=203.66.191.186:\

:rp=lpt1:\

:lf=/var/spool/lpd/pserverd.log:\

:sd=/var/spool/lpd/pserverd:\

:mx#0:

Lines should be indented with tabs. More than one printer name can be

used, with variants separated by vertical bars (name1|name2).

The rm= entry should correspond to the IP address you have assigned to

the print server. You can also use a host name if you have assigned one in

the /etc/hosts file.

The sd= entry should corr espond to the spool directory you created in the

previous step.

The rp= entry should correspond to the port name of the remote printer.

The values should be one of lpt1, lpt2 or lpt3 depends on the printer port.

The print server should now be available for printing from your Unix host.