AirLive WP-203G - Manual (Page 93)

8.4.3 TCP/IP
You can configure the print server to automatically get IP from DHCP
server or manually specify static IP. The print server also has a built-in
DHCP server. You can enable this DHCP server and let it manages IP for
you.
If you need the print server to automatically get an IP from DHCP server,
select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/
BOOTP)”. You also can select “Disable Use the following TCP/IP
Settings” to manually assign “IP Address”, “Subnet Mask” and “Gateway”
for the print server.
You can enable/disable for the print server’s DHCP server. The DHCP
server is disabled by default. If the DHCP Server is enabled, you have to
assign a range of IP addresses here. Fill in the “Start IP”, “Range”,
“Gateway”, “DNS”, and “Domain””, and the print server will assign a
unique IP for each client.
88