AirLive WP-203G - Manual (Page 65)

The list is the scanned active wireless stations. Select a wireless station in
the list and click “Next”. If you cannot find the wireless station that you
want the print server to communicate with, click “Scan” to let the print
server scan again.
Both “Infrastructure” and “Ad-Hoc” mode have to go through the
following procedure:
This print server supports WEP and WPA-PSK security mode. If you want
to use WEP encryption to protect your wireless network, you have to
select “WEP(ASCII)” or “WEP(HEX)”. If you want to use WPA-PSK, you
have to select “WPA-shared key”. The wireless security setting should be
the same with other wireless devices in the same network.
WEP Security Mode:
60