AirLive WN-300PCI - Manual (Page 48)

44
click ‘Connect’ to establish connection to selected access point, if there are more than
one WPS-enabled access point found. You can also click ‘Rotate’ button, and next
access point on the list will be selected to establish connection.
If you want to delete a found access point from the list, select it and click ‘Delete’ button.
2-7-2 WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow the following
instructions to establish connection to it:
1. Right-click the Airlive configuration utility icon located at lower-right corner of computer
desktop and then click ‘Launch Config Utility’.
2. Click ‘WPS Configuration’ menu, and the following settings will appear.