AirLive WN-300PCI - Manual (Page 20)

16
If you can not see the access point you wish to connect here, please click ‘Rescan’ button
to scan for access point again, until the one you preferred is displayed. You may have to
click ‘Rescan’ for more than two times before you can see the access point you wish to use
here.
If you still can not see the access point you wish to use after clicking ‘Rescan’ for more than
five times, please move your computer closer to the location where the wireless access
point is, or see instructions in Chapter 4-2 ‘Troubleshooting’.
If you wish to see detailed information for a specific access point, please double-click on it,
and you’ll be provided with its detailed information.