AirLive WN-151ARM - Manual (Page 64)

AirLive WN-151ARM User’s Manual 64
Port Trigger Screen
Port Trigger
Enable Use this to Enable or Disable this Special Application as required.
Name Enter a descriptive name to identify this Special Application.
Outgoing
Ports
• Type - Select the protocol (TCP or UDP) used when you send data to the
remote system or service.
• Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
• Finish - Enter the end of the range of port numbers used by the application
server, for data you send to it. If the application uses a single port number,
enter it in both the "Start" and "Finish" fields.
Incoming
Ports
• Type - Select the protocol (TCP or UDP) used when you receive data from
the special application or service. (Note: Some applications use different
protocols for outgoing and incoming data).
• Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single port
number, enter it in both the "Start" and "Finish" fields.
• Finish - Enter the end of the range of port numbers used by the application
server, for data you receive.