AirLive WN-151ARM - Manual (Page 62)

AirLive WN-151ARM User’s Manual 62
Schedule Screen
Schedule
Day Each day of the week can be scheduled independently.
Session 1
Session 2
Two (2) separate sessions or periods can be defined. Session 2 can be left
blank if not required.
Start Time Enter the start using a 24 hr clock.
Finish Time Enter the finish time using a 24 hr clock.
Local Time
Time Zone In order to display your local time correctly, you must select your "Time Zone"
from the list.
Adjust for
Daylight
Savings Time
If your region uses Daylight Savings Time, you must manually check "Adjust
for Daylight Savings Time" at the beginning of the adjustment period, and
uncheck it at the end of the Daylight Savings period.
Use this NTP
Server
If you prefer to use a particular NTP server as the primary NTP server, check
the checkbox "Use this NTP Server" and enter the Server's IP address in the
fields provided.
If this setting is not enabled, the default NTP Servers is used.
Current Time This displays the current time on the WN-151ARM, at the time the page is
loaded.