3 system requirements, 4 package list, 3 system requirements 1.4 package list – AirLive WMU-6500FS User Manual
Page 7: Usb device
AirLive WMU-6500FS User’s Manual
6
USB Device
z
Built-in USB2.0 host to connect to USB mass storage device, like USB flash drive, USB hard drive, etc.
z
Easy copy button: Offer the button to copy folders and files from USB device to internal HDD.
Wireless Functions
z
Up to 54Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing (OFDM).
z
IEEE 802.11b compatible (11Mbps): Allowing inter-operation among multiple vendors.
z
IEEE 802.11g compatible (54Mbps): Allowing inter-operation among multiple vendors.
z
Wireless data rate supported: 6/12/18/24/36/48/54 Mbps in 802.11g mode; 1/2/5.5/11Mbps in 802.11b
mode.
z
Support 64/128-bit WEP encryption.
z
Support 802.1X authentication.
z
Support WPA, WPA-PSK with TKIP and AES encryption.
z
Support WPA2, WPA2-PSK with TKIP and AES encryption.
z
Support Client, AP, WDS, and WDS Hybrid wireless modes.
(NOTE. Only AP mode and Hybrid mode can support WPA and WPA2.)
Scheduling Download Assistant
z
Scheduling download assistant allows users to download files via FTP, HTTP, and BitTorrent without
turning on computer.
1.3 System Requirements
To start to use the AirLive WMU-6500FS, your system must have the following minimum requirements:
z
Windows 95 / 98 / ME / 2000 / XP, or any other operating system can support Samba.
z
An Ethernet (10BaseT or 10/100BaseT) adapter for wired client.
z
At least one WLAN client adapter of 802.11g (54Mbps) or 802.11b (11Mbps) for wireless connection.
z
TCP/IP and NetBIOS network protocol installed.
z
Web browser installed.
The AirLive WMU-6500FS requires an external 12V, 4A power supply which is included in the package. For safe
operation, please only use the power adapter which is provided by this product.
1.4 Package List