AirLive WMU-6500FS - Manual (Page 15)

There are three methods to configure AirLive WMU-6500FS. Please refer to the following instructions, and choose
one which is most convenient to you.
Method 1: Use Configuration Tool to Setup
Before you can do this, you need to install the configuration tool from installation CD first. After that, please use the
configuration tool to “Query” and you will see the status page and input “airlive” to login.
NOTE. The default login password is “airlive”.
If there is any DHCP server in the network, AirLive WMU-6500FS will be as the client and get one IP address from
existed DHCP server. You can also use configuration utility to Query to find the IP address that AirLive WMU-6500FS
gets.
About other operating systems, such as Linux X-window or Mac OS, please use web browser to configure.
Method 2: Use Web Browser to Setup
Launch any web browser, such as Internet Explorer or Netscape on your computer, and then input IP address of
AirLive WMU-6500FS in the address field. For an example, type “http://192.168.123.254” and press “Enter”, then you
can see the configuration page of AirLive WMU-6500FS
NOTE. You have to know the IP address of AirLive WMU-6500FS when you use this method. The default IP address
is “192.168.123.254”.
AirLive WMU-6500FS User’s Manual 14