AirLive WMU-6500FS - Manual (Page 34)

The default setting is “Disable MAC filtering”, every wireless client could connect to this AirLive WMU-6500FS.
When you select “ALL accept”, the wireless clients with the MAC addresses you enter below will be accepted to
connect to this AirLive WMU-6500FS, the others will be rejected. When you select “ALL Reject”, the wireless clients
with the MAC addresses you enter below will be rejected to connect to this AirLive WMU-6500FS, the others will be
accepted.
After finish configuration, press “Next” button to review all wireless settings. If everything is correct, then press
“Confirm” button to save and take effect new settings.
3.2.2.2 Wireless client mode
Select the “Wireless Client mode” and click “Next” button to setup under the Wireless client mode.
After entering the Wireless client mode setting, click the “Scan AP” to scan the existing AP in your environment. Then
click the AP that you want to connect to.
AirLive WMU-6500FS User’s Manual 33