AirLive WMU-6500FS User Manual

Page 14

In addition, you can also allocate a static IP address on your computer as below:

Step 1: Find the Internet Protocol (TCP/IP) Properties from My Network Places and check the Properties of

Local Area Network Connection. Choose “Use the following IP address”, and assign one IP address which can

be from 192.168.123.1 to 192.168.123.253. Here we use the 192.168.123.88 as the IP address. The Subnet mask

must be 255.255.255.0, and the Default gateway must be 192.168.123.254. Then click “OK” button to complete

TCP/IP setup.

NOTE. The IP address of default gateway must be same as IP address of AirLive WMU-6500FS.

Step 2: Then go to command prompt mode from Start Menu->Programs-> Accessories. Type “ipconfig” and press

the “Enter”. Then the following message should be found. Check the IP address, Subnet Mask, and Default Gateway

addresses are same as previous settings. If same, you are successful to setup the network configuration.

AirLive WMU-6500FS User’s Manual