AirLive WMU-6500FS - Manual (Page 13)

Step 2: You may see there are many connections in your computer. Just select one which you will use it to connect to
AirLive WMU-6500FS. Then choose the “Properties” of that connection.
Step 3: Check the “Client for Microsoft Networks”, “File and Printer Sharing for Microsoft Networks”, and
“Internet Protocol (TCP/IP)” are installed or not. If not, please install those communication protocols.
If you use other operating system, such as Linux, X-window or Mac OS, please refer to original manual of your OS to
finish the configurations of TCP/IP and other required communication protocols.
2.2.2 Wired Ethernet Connection
Use one Ethernet cable to connect the AirLive WMU-6500FS and your computer directly. Then power on the AirLive
WMU-6500FS.
Ethernet cable
The AirLive WMU-6500FS will detect automatically if there is any DHCP server nearby. If yes, it will get an IP address
from DHCP server. But if there is no DHCP server in your environment, the AirLive WMU-6500FS will become a
DHCP server, and assign IP address to your computer. You can get some information as below shown.
Then go to command prompt mode from Start Menu->Programs-> Accessories, and type “ipconfig”. If the IP
address and subnet mask are shown 0.0.0.0, please type “ipconfig /renew” to retrieve an IP address.
AirLive WMU-6500FS User’s Manual 12