AirLive WMU-6500FS - Manual (Page 31)

z Channel: choose the radio channel number. The default channel of AirLive WMU-6500FS is “1”. Please DO
NOT set the same channel with your existed wireless network.
z SSID: the SSID identifies a specific wireless LAN. Before associating with a particular wireless LAN, a station
must have the same SSID as the access point. The default SSID setting is “airlive”.
z Authentication: authentication ensures that digital data transmissions are delivered to the intended receiver.
This option enables you to set the authentication method for various encryption schemes.
z WEP Encryption: select “64” or “128” bits for encryption method to protect your data by encrypting it. The
WEP key can be 5(or 13) ASCII characters or 10(or 26) hexadecimal characters based on whether you select
64 bit or 128 bit WEP encryption.
z 802.1X: IEEE 802.1x authentication can be done by using an external RADIUS server. You need to input the
IP address of RADIUS server and Shared Secret. Please refer to FAQ in chapter 8 to get more detailed
information.
z WPA-PSK, WPA2-PSK: AP and Client need to use identical Pre-shared key (PSK). Please choose TKIP or
AES for encryption type, and then input 64 Hex key (0~F) or 8~63 ASCII characters.
AirLive WMU-6500FS User’s Manual 30