AirLive WL-5450AP - Manual (Page 28)

AirLive WL-5450AP User’s Manual
26
4.4 TCP/IP
4.4.1 Basic
In this page, you can change the TCP/IP settings of this Access Point, select to enable/disable the DHCP
Client, 802.1d Spanning Tree, and Clone MAC Address.
IP Address This field can be modified only when DHCP Client is disabled. If your system
manager assigned you static IP settings, then you will have to enter the
information provided.
Subnet Mask Enter the information provided by your system manager.
Default Gateway Enter the information provided by your system manager.
DHCP Select Disable, Client or Server from the pull-down menu.
Disable: Select to disable DHCP server function.
Client: Select to automatically get the LAN port IP address from ISP (For
ADSL/Cable Modem).
Server: Select to enable DHCP server function.
DHCP Client
Range
WL-5450AP IP addresses continuing from 192.168.100.1 to 192.168.100.253
Show Client Click to show Active DHCP Client table.
DNS Server Enter the Domain Name Service IP address.
802.1d Spanning
Tree
To enable 802.1d Spanning Tree will prevent the network from infinite loops.
Infinite loop will happen in the network when WDS is enabled and there are
multiple active paths between stations.