AirLive WL-5450AP - Manual (Page 26)

AirLive WL-5450AP User’s Manual
24
4.3.5 Site Survey
Site survey displays all the active Access Points and IBSS in the neighborhood. When you are in the client
mode, you can select one AP to associate.
Press Refresh to get the latest information.
4.3.6 WDS Setting
To enable WDS function will let this AP enter “Bridge Mode”. Two APs in bridge modes can communicate
with each other through wireless interface. That is, two stations associated to different AP in bridge mode can
communicate with each other.
† Enable WDS Check the checkbox to enable WDS, all of the WDS settings in this screen can
be enabled only when WDS or AP+WDS is selected in Wireless Basic Settings
screen (See page 19).
Add WDS AP MAC Address: Enter the MAC Address for the Access Point to establish WDS
Comment: You may enter up to 20 characters as a remark to the previous MAC
Address.