AirLive WL-5450AP - Manual (Page 20)

AirLive WL-5450AP User’s Manual
18
Channel Number Allow user to set the channel manually or automatically.
If set channel manually, just select the channel you want to specify.
If “Auto” is selected, user can set the channel range to have Wireless
Access Point automatically survey and choose the channel with best
situation for communication.
The number of channels supported depends on the region of this Access
Point. All stations communicating with the Access Point must use the same
channel.
Enable Mac Clone (Single
Ethernet Client)
If your ISP restricts service to PCs only, use the MAC Clone feature to copy
a PC Media
Access Control (MAC) address to your router. This procedure will cause the
router to appear
as a single PC, while allowing online access to multiple computers on your
network.
Apply Changes Press to save the new settings on the screen.
Reset Press to discard the data you have entered since last time you press Apply
Change.
4.3.2 Advanced Settings
It is not recommended that settings in this page to be changed unless advanced users want to change to
meet their wireless environment for optimal performance