AirLive WL-5450AP - Manual (Page 14)

AirLive WL-5450AP User’s Manual
12
3.3 Client Mode (Infrastructure)
If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a
computer so that the computer can send packets from wired end to wireless interface.
Refer to the illustration below. This station (AP1 plus the connected computer 1) can associate to another
Access Point (AP2), and then can have the Internet access if the other Access Point (AP2) has the Internet
connection.
To set the operation mode to Client (Infrastructure), please go to “Wireless JBasic Settings”, in the
“Mode” field click the down arrow b to select Client mode, and then select “Network Type” as
“Infrastructure”.