AirLive VS-100 - Manual (Page 51)

4. Operating the Video Server
AirLive VS-100 User’s Manual 48
„ NTP Server:
Type the host name or IP address or domain name of the NTP server.
„ NTP sync. Interval:
Select an interval between 1 and 23 hours at which you want to adjust the device’s time
referring to NTP server
„ Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is
installed.
„ Daylight Saving:
Disable or enable the daylight saving adjustment.
4.2.3.3 Maintenance
„ Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
„ Factory Default (Except the network setting):
The unit is restarted and most current settings are reset to factory default values. This
action will not reset the network setting.