AirLive VS-100 - Manual (Page 44)

4. Operating the Video Server
41 AirLive VS-100 User’s Manual
„ Default Settings:
Restore to factory image settings.
4.2.2.2 PTZ Setting
„ Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them thru
RS485 interface.
„ Camera Address:
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO NOT
change the default value if unnecessary. If so, user needs to check and set value properly
for both sides.
„ Baud rate:
This is the communication speed between network module and speed dome camera. Note
that please DO NOT change the default value if unnecessary. If so, user needs to check
and set value properly for both sides.