AirLive VS-100 - Manual (Page 14)

2. Package Contents and Installation
11 AirLive VS-100 User’s Manual
Connect an external power supply to the 12VDC power in connector of the Video Server.
Note: Use the power adapter, 12VDC, included in the package and connect the other end to
wall outlet for AC power.
Once you have installed the Video Server well, the status LED will turn orange. It means the
system is booting up successfully. Furthermore, if you have a proper network connection,
and access to the Video Server, the LED will flash green
6. Connect the DC power to one external camera from Video Server (option)
The Video Server can provide 12VDC out to supply one external camera. Note that the
output current is 400mA maximum.
7. Done
„ 2.4 Search and Set up by IPWizard II
When you installed the Camera on a LAN environment, you have two easy ways to search
your Cameras by IPWizard II or UPnP discovery. Here is the way to execute IPWizard II to
discover Camera’s IP address and set up related parameter in a Camera.