AirLive VS-100 - Manual (Page 32)

4. Operating the Video Server
29 AirLive VS-100 User’s Manual
4.2.1.1 Network: Configure Network settings
Use this menu to configure the network to connect the device and the clients.
„ Network
This section provides the menu for connecting the device through Ethernet cable.
„ MAC address:
Displays the Ethernet MAC address of the device. Note that user can not change it.
„ Obtain an IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this
device can not get an IP address within limited tries, the device will assign a default IP
address, 192.168.1.100, by itself as the default IP address.