AirLive POE-280HD - Manual (Page 59)

6. Setting-Basic
AirLive POE-280HD User’s Manual
54
6.4.3 IP Filter
IP Filter provides the function of controlling the range of IP address, similar with firewall
service.
IP Filter:
Select if you would like to have IP filter function.
Allow Range:
The default range is from 0.0.0.0 to 255.255.255.255. Enter the “Start IP address” and
“End IP address” in the range, then you can add a new allow range in allow range list.
Allow Range List:
Except the default range 0.0.0.0~255.255.255.255, the list allows to add four more
sets of allow range at most.
Deny Range:
You can define the deny range by entering “Start IP address” and “End IP address”
Deny Range List:
You can define not more than five sets of deny range in the list.
Note: The super user account, “admin”, will not be blocked even the user access the
device with a denied IP.