AirLive POE-280HD - Manual (Page 35)

6. Setting-Basic
AirLive POE-280HD User’s Manual
30
Multicasting Streaming (if it’s on):
Multicast Address: The multicast server address will appear automatically.
Video Port:
Specify the transmission port number of the video data, from 1024 to 65535.
Time to Live:
Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as
the number of network routers that can be passed before data arrives at its
destination or is dropped) within which a multicast packet must reach its
destination.
Image Size:
Specify the image size when the network camera transmits. Choose one among
1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
Frame Rate:
Set the frame rate of H.264 image. Choose one value among 2, 3, 4, 5, 7, 10 15,
20, 25 and 30 fps. The unit “fps” stands for “frames per second”.
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of all
three video compression format (H.264/MPEG-4/MJPEG) should set equal to or
smaller than 640x480 at the same time.
Quality:
z
Auto: The quality and bitrate will be adjusted automatically according to the
frame rate.
z
Fixed Quality: Select the value of quality among Medium, Good, Detailed
and Excellent.
Fixed Bitrate:
Set the bitrate of H.264 image transmission for a line. Select one among 64Kbps,
128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbps, 2 Mbps, 3
Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.