AirLive POE-280HD - Manual (Page 37)

6. Setting-Basic
AirLive POE-280HD User’s Manual
32
Multicasting Streaming (if it’s on):
Multicast Address: Specify the multicast server address.
Video / Port:
Specify the transmission port number of the video data, from 1024 to 65535.
Time to Live:
Set the maximum TTL that multicast can pass through.
Note: Time To Live option determines the maximum length of time (measure as
the number of network routers that can be passed before data arrives at its
destination or is dropped) within which a multicast packet must reach its
destination.
Image Size:
Specify the image size when the network camera transmits. Choose one among
1280 x 1024, 1280 x 720, 640 x 480, and 320 x 240.
Frame Rate:
Set the frame rate of the MPEG-4 image. Choose one from 1, 2, 3, 4, 5, 7, 10, 15,
20, 25, and 30 fps. The unit “fps” stands for “frames per second.”
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480.
However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of
H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at
the same time.
Quality:
z
Auto: The quality and bitratee will be adjusted automatically according to the
frame rate.
z
Fixed Quality: Select the value of quality among Medium, Good, Delicate
and Excellent.
Fixed Bitrate:
Set the bitrate of MPEG-4 image transmission for a line. You can select one value
among 64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5
Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.