AirLive POE-280HD User Manual
Page 13
2. Package Contents and Installation
AirLive POE-280HD User’s Manual
8
C. Adjust the view angle- 3 axis Mechanism Design
1. Turn the lens module right and left to your desired pan position.
2. Turn the lens module up and down to your desire tile position.
3. Turn the lens module to adjust the image orientation to satisfied angle.
D. Completion
1. Clean the dome bubble to remove the dust and finger print.
2. Rotate the black shield on the dome bubble to match the camera’s position.
3. Fasten the dome cover to the base clockwise and make secure two parts reaching the
final position by checking two small dots on the side of housing
4. Slightly adjust dome bubble to final position if needed and double check the camera is
properly focused.
5. The installation is complete now.