AirLive POE-280HD - Manual (Page 33)

6. Setting-Basic
AirLive POE-280HD User’s Manual
28
RTP:
Unicast Streaming: The default value of port range is 5000 ~ 7999 and can be
changed from 1024 to 65535.
Note: Under Unicast streaming mode, streaming video is delivered from the
camera to a single client device.
Image Rotated:
Select the screen display “flip”, “mirror”, or “flip + mirror.”
Video Clip Format:
Select RECORDING compression format H.264 or MPEG-4.
z
MPEG-4: MPEG-4 has the advantage of sending a lower volume of date per
time unit across the network (bit-rate) compared to Motion JPEG and
therefore provides a relatively high image quality at a lower bit-rate
(bandwidth usage).
z
H.264: H.264 provides higher compression rate than MPEG-4. Thus, H.264
can decrease the bandwidth usage and further apply on 3G. However, H.264
will occupy more system resources than MPEG-4. As long as the operating
system appears operating difficulties under H.264 format, please change to
select MPEG-4.
Analog video output:
Turn On/Off the Analog output.
IR Threshold:
Select LED light On, Off, and Auto.
z
On: Select On will led always work.
z
Off: Select off will disable led.
z
Auto: Select Auto will appear two thresholds, which one is Bright and the
other is Dark, and you can adjust the threshold for led Auto-On and Auto-Off
respectively. The Bright value higher, the led auto-off more easily in the bright
environment will be. The Dark value higher, the led auto-on more easily in the
dark environment will be. Both values range from 0 to 100.