AirLive Ether-GSH2416W - Manual (Page 49)

49
2.9.2 DHCP Client
The IP address of the Ether-2416W web smart switch could be statically assigned by manual entry or
dynamically assigned by a DHCP server.
2.9.2.1 Assign a fixed IP address
Change DHCP Client to be disabled. Enter a fixed IP address, Subnet mask and Gateway, and then
click Apply button.
2.9.2.2 Assign a IP address by DHCP server
Change DHCP Client to be Enable. This system’s IP address, subnet mask and gateway address and
will be assigned and changed immediately by DHCP server. It may loss the web connection because
of the changing of the system’s IP. Use the console port to get the most current network
configurations after enabling the DHCP function.
The IP address, Subnet mask and Gateway fields will be disabled (read-only) while the DHCP
client is set to Enabled.