AirLive Ether-GSH2416W - Manual (Page 46)

46
2.9.1 Firmware Update
The Ether-2416W web smart switch provides the capability of firmware update for new features,
customized requests and system fault recovery. This page shown as below can be activated by
clicking the Update link in System Setup page.
This system supports both BOOTP/TFTP and pure TFTP to update the firmware. The TFTP server
IP address and firmware filename needs to be correctly provided to the switch to start the firmware
updating if the pure TFTP, the traditional way, is selected. Using the BOOTP/TFTP is much easier to
do the firmware updating because no parameters needs to be input if the BOOTP/TFTP server is
correctly setup.