AirLive Ether-GSH2416W - Manual (Page 47)

47
2.9.1.1 Firmware Update Via TFTP
Before to do the firmware update, it is required to correctly prepare TFTP server and the firmware
file which will be uploaded to the switch by the TFTP server. (Please refer to the vendor’s instruction
guide for setting up the TFTP server you would like to use.
While the TFTP server and the firmware file are ready, please enter the TFTP server IP address and
firmware filename. Click the Apply button to start the firmware update through the any front port on
the switch.
The time for processing the firmware update will approximately take 50 seconds if there is no
communication problem between the switch and the TFTP server and the firmware file can be
located by TFTP server.
NOTE: If switch can not connect to TFTP server, click the Cancel button to stop the firmware
update progress.