AirLive ARM-201 - Manual (Page 8)

5
AirLive ARM-201 User’s Manual
‹ Multi-connection protocol support
z Multi Protocol over AAL5 (RFC1483 / 2684)
z Classical IP over ATM (RFC 1577)
z VC and LLC Multiplexing
z PPP over Ethernet (RFC 2516)
z PPP over ATM (RFC 2364)
‹ Network Address Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol address used within
one network (for example a private IP address used in a local network) to a different IP address known within
another network (for example a public IP address used on the Internet).
‹ Universal Plug and Play (UPnP)
Universal Plug and Play is a standard that uses Internet and Web protocols to enable devices such as
PCs, peripherals, intelligent appliances, and wireless devices to be plugged into a network and automatically
know about each other. This protocol is used to enable simple and robust connectivity among stand-alone
devices and PCs.
‹ Dynamic DNS Support
With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address, allowing
the host to be more easily accessible from various locations on the Internet. You must register for this service
with a Dynamic DNS client.
‹ DHCP Support
DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP configuration at
start-up from a centralized DHCP server. The ADSL router has built-in DHCP server capability enabled by
default. It can assign IP addresses, an IP default gateway and DNS servers to DHCP clients. It can also act as
a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real DHCP
server to the clients.
‹ Device Management
z Web-based GUI Configuration / Management
z Command-line Interpreter (CLI)
z Telnet Remote Management
z Firmware upgrade via FTP / TFTP (Web-based GUI)
z Built-in Diagnostic tool and IP Ping
‹ SNMP (Simple Network Management Protocol) Support
It’s an easy way to remote control the router via SNMP.