AirLive ARM-201 - Manual (Page 52)

49
AirLive ARM-201 User’s Manual
Static IP: Select this option to set static IP information. You will need to enter in the encapsulation type (1483
Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC (IPoA), 1483 Routed IP VC-Mux), IP address,
subnet mask, and gateway address provided to you by your ISP. Each IP address entered in the fields must
be in the appropriate IP form, which is 4 IP octets separated by a dot (x.x.x.x). The Router will not accept the
IP address if it is not in this format.
[PPPoA/PPPoE]
Select this option if your ISP requires you to use a PPPoE connection. This option is typically used for DSL
service. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Selection
Static PPPoE to use static IP address for your PPPoE connection. Please enter the information accordingly.
Username: Enter your username for your PPPoE/PPPoA connection.
Password: Enter your password for your PPPoE/PPPoA connection
Encapsulation: For both PPPoE/PPPoA connections, you need to specify the type of Multiplexing, either