AirLive ARM-201 - Manual (Page 14)

11
AirLive ARM-201 User’s Manual
Chapter 3: Connecting ADSL2+ Router via
Ethernet and USB
You can connect ADSL2+ router with PC through either Ethernet cable or USB cable. After
connection is established, you can configure the host PC to be a DHCP client. You have to repeat the same
steps for every host PC on your network if you use DHCP function on your router.
3.1 ADSL Auto Setup Wizard
Internet: Basic Setting
Step 1: Please insert the driver CD that came with your device into your CD-ROM drive, the driver CD will
auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My
computer", and execute autorun.exe. The following screen will be displayed.
Click “Setup Wizard”.
Step 2: Please select the country you have installed the ADSL router and click “Next”.