AirLive ARM-201 - Manual (Page 39)

36
AirLive ARM-201 User’s Manual
You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly
and if your computer has successfully connected to this router.
2) Type ping 192.168.2.1 under DOS prompt and the following messages will appear:
Pinging 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes=32 times<2ms TTL=64
Reply from 192.168.2.1: bytes=32 times<1ms TTL=64
Reply from 192.168.2.1: bytes=32 times<10ms TTL=64
If the communication link between your computer and router is not setup correctly, after you type ping
192.168.2.1 under DOS prompt following messages will appear:
Pinging 192.168.2.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
This failure might be caused by cable issue or something wrong in configuration procedure.
3.5 USB Device Driver Installation on MAC OS
Step 1. Once you insert the Device Driver CD-ROM disk, direct the path of your MAC OS. Double-click the
compressed “.zip” file to unzip the file. Then, you will get a “.pkg” file.
Step 2. Double-click the “.pkg” file, the AirLive ADSL modem installer windows will appear. Click
“Continue” to go next process