AirLive ARM-201 - Manual (Page 53)

50
AirLive ARM-201 User’s Manual
LLC or VC mux.
Connection Setting: For PPPoE/PPPoA connection, you can select Always on or Connect on-demand.
Connect on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period of time,
the connection will tear down automatically. And once there is traffic send or receive, the connection will be
automatically on.
IP Address: For PPPoE/PPPoA connection, you need to specify the public IP address for this ADSL Router.
The IP address can be either dynamically (via DHCP) or given IP address provide by your ISP. For Static IP,
you need to specify the IP address, Subnet Mask and Gateway IP address.
Bridge Mode: The modem can be configured to act as a bridging device between your LAN and your ISP.
Bridges are devices that enable 2 or more networks to communicate as if they are 2 segments of the same
physical LAN. Please set the Connection type.
[NAT]
NAT: Select this option to Activate/Deactivated the NAT (Network Address Translation) function for this VC.
The NAT function can be activated or deactivated per PVC basis.
Default Router: Select whether this PVC will be default router for internet data.