2N SIP Speaker Installation v2.1 - Manual (Page 24)

24
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.3 Basic Functions
2N SIP Speaker Button Control
®
2N SIP Speaker
®
is equipped with two buttons on the front panel.
Volume Buttons Figure:
Use these buttons to adjust the volume. 2N SIP Speaker
®
2N SIP Speaker Remote Control
®
2N SIP Speaker
®
is equipped with an infrared remote control receiver.
Remote Control Receiver Figure:
Use the remote controller (Part No. 914103E) for volume adjustment.
Be sure to set the remote controller into the compatible mode 2N SIP Speaker
®
before the first use or after every battery replacement. Follow the steps below:
Remote Controller Setting
Press and hold the button until the controller flashes twice. MAGIC
Press the following buttons sequentially: once the left button, once the right
button, twice the middle button and once the left button.
Tip
The remote controller is not part of the standard delivery. Order it under
Part No. 914103E.