2N SIP Speaker Installation v2.1 - Manual (Page 23)

23
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
Factory Default Reset with DHCP Client ON
Use a thin rigid tool (toothpick or paperclip) to press the RESET button on the
front panel and push the - volume button at the same. Do not disconnect the
device from the power supply while resetting.
Reset with DHCP ON Figure:
Keep the RESET and - volume buttons pressed until the RDY/ACT LED stops
flashing red and you can hear a beep (for approx. 18 s).
Now release both the buttons.