2N NetStar Hardware manual - Manual (Page 18)

18
Pin1= transit +,
Pin2= transit -,
Pin3= receive +,
Pin6= receive -
USB
USB Host interface Connection
Interface type – USB 1.1
Connection – 2x USB–A
Physical layer – Low Speed – 1.5Mbits/s
Power supply – 5V
Consumption – max. 100mA
COM
RS 232C interface connection
Interface type – RS232C
Configuration – 115200Bd, 8bit, parity: none, stop bit: 1
Connection – RJ11 (6x6)
Pin1= TxD-,
Pin2= TxD+,
Pin3,4= GND,
Pin5= RxD+,
Pin6= RxD-
MMC
MMC cards slot – MMC 7pins
MMC 4.0 and MMC Plus 13 pins
Buses – 1–bit (MMC) and 4–bit (MMC4.0 and MMC+)
Power supply – 3,3V
Reading speed – up to 22, Mb/s
Writing speed – up to 18 Mb/s
Maximum recommended capacity – 4 GB