2N Omega 48 - StarPoint 500 - manual v2.0 - Manual (Page 17)

2N OMEGA 48
2N StarPoint 500
User‘s Manual
17
www.2n.cz
Flash
Flash
3) Press the DND button - The caller will be immediately redirected to the
“operator”.
3.6. Turn Down the Ringing Volume
Situation: Your telephone is ringing, you don’t want to be disturbed by the
ringing and you don’t want to answer the call
What to do: Press and use the “+”
and “-“ buttons.
The sound of the ringing is muted, the caller still hears the ringing tone. You can still
answer the call by picking up the receiver.
3.7. Turn Off the Microphone Temporarily – To Prevent the Other
Party from Hearing Me
Situation: During a call you want to prevent the caller from hearing you
temporarily
What to do: Press the programmable button with the set Mute function
to turn the microphone off temporarily.
3.8. Transfer a Call
Situation: During a call you want to transfer the caller to another telephone
number
What to do: Press the FLASH programmable button
, you will hear a
dialing tone in the receiver (the other hears the on-hold music in the receiver). Dial
the telephone number, to which you wish to transfer the call. After getting the ringing
tone press the TRF function button and hang up. Alternatively, you can wait until the
call is answered by the called party (if you want to speak with the party, to which the
call is being transferred, before the transfer), press the TRF function button, and
after you hang up the parties will be connected.
3.9. Add a Call to a Conference
Situation: During a call you want to add a third party to a conference.
What to do: Press the FLASH programmable button
, you will hear a
Mute