2N Wireless 3G router 2N EasyRoute_new design - User manual, 1670 v1.06 - Manual (Page 23)

Table of Programmable Parameters 3.2
23
Icons
There are three navigation icons in the right-hand upper corner of the screen for you
to access the SETUP, SMS and STATUS menus quickly and easily.
The following basic control buttons are located in the right-hand bottom corner of the
configuration interface:
Refresh – update screen data.
Apply – use the set values. An alternative to the Save button.
Save / Export - save the settings into the gateway memory.
Tip
 In some menus, such as Report, e.g., the Save button saves the
displayed reports into your PC memory.
Default – use the default values on the page.
Select all – tick off all items on the page.
Delete – erase the selected items.
Send – send the available SMS.
Update – download the latest firmware version.
Tip
 You can use the Upgrade button for restarting too in case you are not
located directly at the gateway. Before doing this, make sure that
Automatic restart is enabled.