Echo 74624S Owners Manual v.2 - Manual (Page 21)

19
5.1 mainTenance Schedule
Service & mainTenance
the items listed in the service and maintenance schedule are to be checked, and if necessary, corrective action taken. this sched-
ule is designed for units operating under normal conditions. If the unit is operating in adverse or severe usage conditions it may be
necessary for the items to be checked and serviced more frequently.
See eNgINe oWNeRS MaNual FoR FuRtHeR eNgINe MaINteNaNCe aNd tRoubleSHootINg INFoRMatIoN.
Service and mainTenance Schedule
freQuencY
comPonenT
mainTenance
reQuired
refer To
engine
oPeraTor
manual
everY 8
hourS
everY
25
hourS
everY
50
hourS
everY
200
hourS
everY
Year
aIR CleaNeR CHeCk aNd CleaN (1)
aIR INtake CleaN (1)
eNgINe oIl CHaNge (1)
Fuel FIlteR RePlaCe
SPaRk Plug
CHeCk CoNdItIoN aNd
gaP
eNgINe oIl CHeCk
Fuel taNk FIll
CHIPPeR aNvIl
CHeCk 1/16" to 1/8" CleaR-
aNCe aNd Re-toRQue to
120 Ft- lbS. (2)
CHIPPeR bladeS
CHeCk SHaRPNeSS aNd
Re-toRQue to 120 Ft-lbS.
(2)
all INteRNal aNd
exteRNal NutS aNd
boltS
Re-toRQue PeR aSSeMbly
toRQue CHaRt
belt CoNdItIoN CHeCk
belt teNSIoN CHeCk
gReaSe zeRkS lube
eNtIRe MaCHINe CleaN
Hyd. oIl FIlteR RePlaCe
WHeel beaRINgS CHeCk aNd RePaCk
(1) PeRFoRM MoRe FReQueNtly uNdeR extReMely duSty CoNdItIoNS.
(2) PeRFoRM MoRe FReQueNtly WHeN CHIPPINg dRy oR dIRty Wood.
as the chipper limited Warranty states, failure by the owner to perform normal maintenance will void the machine's
warranty. The aggressive, high-speed nature of chipping reQuireS The oWner To Perform The above liSTed
normal mainTenance. Special consideration to maintain and re-torque the chiPPer anvil, chiPPer bladeS,
and all inTernal and eXTernal nuTS and bolTS is the sole responsibility of the owner. failure by the owner
to do so shall be cause for bear cat to deny warranty.
Section
5